Water Secondary Console Wsc - Item No 485 - Cebora PLASMA PROF 180 HQC Manual De Instrucciones

2.14 Water Secondary Console WSC - Item no 485

The water console is an accessory device designed to manage the flow of water necessary to cut stainless steel and
aluminium of high quality with a small heat-affected zone. Due to this property, it is well-suited for cutting coated
stainless steel.
It is used with a combination of N2/H2O (nitrogen/water).
Refer to the instruction manual for this accessory for a description of its operation.
TECHNICAL SPECIFICATIONS
FLUIDS
CONCENTRATION
USED
It must have a specific conductivity
Water
of approximately 100
Duty cycle
Degree of housing protection
Net weight
MAX. INLET PRESSURE
MIN 0.25 MPa (2.5 bar)
S/cm
 MAX 0.8 MPa (8.0 bar)
100%
IP 23
7.8 kg
289
354
Fig. 2.10
FLOW RATE
1 l/min
389
87/128