Gas Console Pgc-H2 - Item No 487 - Cebora PLASMA PROF 180 HQC Manual De Instrucciones

2.15 Gas console PGC-H2 - Item no 487

The gas console PGC-H2 is an accessory device designed to manage the flow of gases necessary to cut stainless
steel and aluminium of high quality. It is particularly well-suited for cutting medium-high thickness stainless steel.
The combinations F5/N2 (5% hydrogen–95% nitrogen/nitrogen) and H35/N2 (35% hydrogen–65% argon/nitrogen) are
used.
Refer to the instruction manual for this accessory for a description of its operation.
TECHNICAL SPECIFICATIONS
GASES
CONCENTRATION
USED
Mixture:
H35
35% hydrogen, 65% argon
Mixture:
F5
5% hydrogen, 95% nitrogen
Duty cycle
Degree of housing protection
Net weight
88/128
MAX. INLET PRESSURE
100%
IP 23
6.0 kg
289
354
0.8 MPa (8 bar)
0.8 MPa (8 bar)
Fig.11
FLOW RATE
130 l/min
30 l/min
406