Instrucciones De Instalación Para Diseño Según Ul 508C - Siemens SINAMICS DCM Instrucciones De Servicio

6.10 Instrucciones de instalación para diseño según UL 508C
Nota
El texto siguiente se compone de extractos del archivo UL E203250 y por esta razón se
ofrece en inglés.
● "Solid state motor overload protection at 110 % of full-load current is provided in each
model", or equivalent.
● "Integral solid state short circuit protection does not provide branch circuit protection.
Branch circuit protection must be provided in accordance with the National Electrical
Code and any additional local codes", or the equivalent.
● Blower motor protection type 3RV1011-0EA1 trimmed to 0.33 A manufactured by
Siemens is to be provided for blower motor type R2D225-RA26-11 in drive model sizes C
and D.
● Blower motor protection type 3RV1011-0GA1 trimmed to 0.50 A manufactured by
Siemens is to be provided for blower motor Type R2D250-RA28-17 in drive model size E.
● Blower motor protection type 3FV1011-0KA1 trimmed to 1.25 A manufactured by
Siemens is to be provided for blower motor Type RH28M-2DK.3F.1R in Drive model size
F.
Tabla 6- 44 Overview of Frame Sizes (in mm)
Size Width
A 385
B 385
C 625
D 700
E 780
F 880
SINAMICS DCM DC Converter
Instrucciones de servicio, 02.2015, A5E34777564/RS-AA/001
Height Depth
268 210
268 250
268 275
268 310
268 435
448 505
6.10 Instrucciones de instalación para diseño según UL 508C
Line voltage (V)
400, 480
400, 480, 575
400, 480, 575
400, 480, 575
400, 480, 575
400, 480, 575
conectar
Output current (A)
15 - 30
60 - 280
400 - 600
760 - 850
1000 - 1200
1600 - 3000
191