Energetic POWER RUN 7.0HRC Manual De Instrucciones página 8

If the actual user's pulse reaches above 85% of max. heart rate over 3 minutes, the HEART RATE CONTROL program
will be shut down and the computer will enter the one minute COOL DOWN program.
When the TIME counts down to 0, the HEART RATE CONTROL program is completed, and the computer will enter the
one minute COOL DOWN program.
After the COOL DOWN program, the computer will return to POWER ON status.
The purpose of the HEART RATE CONTROL program is to keep the user's pulse between 65% of the max. heart rate and
85% of the max. heart rate as to reach the most efficient workout result.
USING THE CHEST BELT HEART RATE MONITIOR:
For proper operation, the chest belt should be worn with the monitor strapped across the front of your body
just above the chest line as shown in the drawing on the right. The monitor needs a littel body heat and
moisture in order to work properly. To ensure correct operation you may want to wet the two rubber pickups
under the belt prior to exercising.
Strap chest belt across the front below the chest line.
Please consult your physician or the training instruction to determine your maximum and minimum heart rate.
8