Standard Delivery Content; Guard Trac™ Guardrail; Guard Trac™ Plus Guardrail; Technical Specifications - Tractel guard trac Manual De Instalación, De Operación Y De Mantenimiento

mix synthetic vulcanised rubber 100% Ethyl-
ene-Propylene-Diene Terpolymer). The slope
must be less than 10°.
The guard trac™ guardrail is certified to EN
13374-A 2019.
The guard trac™ plus guardrail is certified to EN
13374-A 2019 and ISO 14122-3 2016.

4. Standard delivery content

GB
Standard delivery of a guard trac™, guard
trac™ t-b or guard trac™ plus guardrail depends
on the configuration of each installation and con-
sists of the following components described in
section 4.1 and 4.2 (details of each component
are specified in section 5).
4.1. guard trac™ guardrail
• Counterweights (fig. 1, rep. 1)
• Fully equipped double brackets (fig. 1, rep. 2)
• Barriers with or without toe-board (fig. 1, rep. 3)
• Latches (fig. 1, rep. 4)
• 1 plastic bag containing this installation, oper-
ating and maintenance manual as well as the
identification plate.
Options available for the guard trac™ guardrail:
• Long or short adjustable length barriers (fig. 2)
• Adjustable aluminium gate (fig.3)
• Counterweight interface (fig. 17).
4.2. guard trac™ plus guardrail
• Counterweights (fig. 4, rep. 1)
• Fully equipped double brackets (fig. 4, rep. 2)
• Fully equipped single brackets (fig. 4, rep. 3)
• Barriers (fig. 4, rep. 4)
• Latches (fig. 4, rep. 5)
• Barrier links (fig. 4, rep. 6)10
• Counterweight interface (fig. 17)
1 plastic bag containing this installation, operat-
ing and maintenance manual and the installa-
tion identification plate.Options available for the
guard trac™ plus guardrail:
• Adjustable length barrier (fig. 5)
• Adjustable gate (fig. 3)
14

5. Technical Specifications

5.1. General features

5.1.1. guard trac™ and guard trac™ t-b
guardrail
The sizes given in the table below are refer-
enced in fig. 1.
Barrier L1 (mm)
3 m 3560
2.5 m 3060
2 m 2560
1.5 m 2060
d: minimum distance of parapet.
L1, L2: footprint.
Sg: installation area (Sc=L1xL2).
5.1.2. guard trac™ plus guardrail
The sizes given in the table below are refer-
enced in fig. 4.
Barrier L1 (mm)
3 m 3560
2 m 2560
d: minimum distance of parapet.
L1, L2: footprint.
5.2. Characteristics of the component
parts
For all the parts we have:
P: Weight
L1: Length
L2: Width
H: Height
Sm: Installation surface
• Counterweight (fig. 6)
W (kg) L1 (mm) L2 (mm) H (mm) Sm (m²)
25 487 222
Reinforced concrete loaded at a density of
3.8 kg/l.
Aluminium identification plate.
L2 (mm) d (mm)
800 50
800 50
800 50
800 50
L2 (mm) d (mm)
800 50
800 50
90 0.03