Inp; Cnt; Led; Tar - Bosch WBE 4120 Instructions De Réparation

en 56 | WBE 4120 / WBE 4120 D / WBE 4120 DT | Auto-diagnosis menu(WBE 4120 /WBE 4120 D)
6.5

INP

The abbreviation indicates the function that controls
directly the micro switch of the protecting carter.
When the cover goes down, if the machine is working
correctly, you will see the notice ON on the right dis-
play.
Left Display Right Display Description
INP ON/OFF
NOTES FOR THE ASSISTANCE
Defect Correction
The value does not + Check the connection on the board.
change. + Check that the cam (code 653035)
that starts the micro switch works
properly.
+ Substitute the micro switch (code
653279).
+ Substitute the board (code 654044).
(paragraph of the Substitution of the
board)
|
1 695 600 579 2016-08-02
State of the carter: OFF open,
ON down
6.6

CNT

The abbreviation indicates the counter of launches
made by the balancing machine.
In order to move inside the function, use + DISTANCE.
Left Display Right Display Description
Cnt
1 500
6
6.7

LED

The abbreviation indicates the "led" lights test of the
board. In order to move inside the function, use + DIS-
TANCE.
Left Display Right Display Description
Led
6.8

TAR

This menu gives the opportunity to check the calibra-
tion values of the board.
Left Display Right Display Description
Tar
6.9

REL

The abbreviation indicates the function of relative bal-
ancing.
We use this procedure to monitor the machine when we
put the requested counterweights and the wheel does
not go to "zero".
NOTES FOR THE ASSISTANCE: Procedure of relative
calibration.
€
Press "SET" until the notice "TST" appears and then
press MM/INCH;
€
Press "SET" until the notice "REL " appears;
€
Mount the wheel;
€
Close the protecting carter and make the launch;
€
The machine shows the unbalance of the wheel that
it will memorize;
€
Close the protecting carter and make a second
launch;
€
You will see "0" "0" on the display;
€
Check the machine as the introduction says.
!
NOTE: To disable the function, turn off the balancing
machine.
Bosch Automotive Service Solutions GmbH
Press "+" DISTANCE to roll down
the menu
Number of overall launches
ex:1500)
Number of daily launches, since
the machine has been started)
Press "+" DISTANCE to roll down
the menu
Press "+" DISTANCE to roll down
the menu