How to use the machine and surfi ng menu | WBE 4120 / WBE 4120 D / WBE 4120 DT | 45
2.2.2
Menu navigation
We can divide the balancing machine menu in several
submenus:
Call-up of service menu (customer service only)
Call-up of calibration menu
Press < I > to return to the previous page.
Settings (customer service only)
User-defined settings
i
The following symbols are used in the selection
menus:
Automatic transfer (e.g. time)
Manual transfer (e.g. via pedal)
Function deactivated
2.2.3
Auto-diagnosis
"
Enter the password: <u> <u> <o> to display the stan-
dard diagnostics menu (display only mode);
"
Enter the password <o> < I > <r>to display the service
diagnostics menu (display only mode).
2.2.4
Calibration
!
Enter the password: <r> <r> <o>.
Calibration with "Go" wheel.
Flange calibration.
Press < I > to return to the previous page.
Vernier caliper and gauge arm calibration.
Bosch Automotive Service Solutions GmbH
2.2.5
Settings
Activates or deactivates the vernier caliper
and the gauge arm.
Press < I > to return to the previous page.
Positioning of adhesive weight (electronic vernier cali-
per, manual vernier caliper (3, 6 or 12 o'clock).
2.2.6
User-defined settings
Activates or deactivates
the screen saver
Activates or deactivates
acoustic acknowledgement signal
Language selection.
Activates or deactivates automatic start (start of measu-
rement by closing wheel guard)
Press < I > to return to the previous page.
Selection of weight display
grams (g) or ounces (oz)
Selection of weight resolution
1 g / 0.05 oz or 5 g / 0.25 oz
Residual value suppression:
Entry of weight value below which the
value "0" is to be displayed.
!
NOTE: All the options are described in details on the
following pages.
en
|
1 695 600 579
2016-08-02