Using The Machine; Preparation - Berkel BV 400/25 Manual De Uso Y Mantenimento

Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60 Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 - BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62

6.1 PrEParaTIoN

WaRNINg! The product to be packed must be dry and cold to obtain maximum vacuum.
The pump performance is reduced if there is moisture in the product or the vacuum chamber.
Therefore, clean the vacuum chamber and insertion plates carefully. Soft products may be
damaged by the compression in the bag when the cycle is complete. use bags having thickness
and size suitable for the product hardness and dimensions.
1) Lower lid holder
insertion plates
longest insertion plate (in models with insertion plates of different lengths) must always be at the top as it
will otherwise hinder vertical movement of the sealing bar.
2) Choose a bag suitable for the product to be packed (the product must take up 2/3 of the bag vo-
lume). Insert inside the vacuum chamber the bag
center it on the sealing bar
For models with bar length sufficient to pack a number of bags simultaneously and for multi-bar models,
distribute the bags at regular distances (=) (fig. 1).
B
E
22

6. uSINg THE MaCHINE

: the vacuum chamber plexiglas cover
a
the chamber can hold, depending on the dimensions of the product to be packed.The
C
, so that the open edge projects by about 20mm beyond the bar.
E
a
d
B
opens. Position the maximum number of
,containing the product to be packed and
d
C
B
fig. 1
a