Maintenance And Technical Support; Recommendations To Protect The Environment - Berkel BV 400/25 Manual De Uso Y Mantenimento

2.7 MaINTENaNCE aNd TECHNICal SuPPorT

This User Manual describes, in a clear and distinct manner, the maintenance, repairs and service operations
to be performed by the machine operators and those that require qualified and trained technicians from an
authorised after-sales and service centre.
always comply with the following guidelines when performing maintenance, service or repairs:
• Switch the machine off via the main switch and remove the plug from the socket.
• Comply with the scheduled maintenance and intervals stipulated in this manual. Delays or lack of maintenance
can lead to costly repairs.
• Only use original spare parts, oils and lubricants.
• Use tools that are in good condition; do not leave tools inside the machine after use.
• Never intervene when the operations to be performed require a qualified technician from an authorised after-
sales centre.
• The operations must only be performed by Technical Support Centres authorised by the manufacturer.
• Any safety devices that are temporarily disabled or removed by a qualified technician for maintenance to be
performed, must be restored once the intervention is complete and their efficiency and functionality must be
verified.

3. rECoMMENdaTIoNS To ProTECT THE ENvIroNMENT

PaCkagINg
• The packaging material is 100% recyclable and is marked with the recycling symbol.
• Comply with local Standards for disposal.
• Do not dispose of the material in the environment. The packaging material (plastic bags, polystyrene, etc.)
must be kept out of the reach of children as they are a potential source of danger.
SCRaPPINg/DISPOSal
• The appliance has been constructed with recyclable material. This appliance is marked in compliance
with European Directive 2012/19/UE - Waste Electrical and Electronic Equipment (WEEE).
• By ensuring that this appliance is scrapped correctly, you shall help prevent potential negative consequences
for the environment and health.
• The symbol on the appliance or on the accompanying documentation, indicates that this product must
not be treated as domestic waste but must be taken to a suitable recycling collection point for electric and
electronic equipment.
• Before scrapping, make the appliance unusable by cutting the power cable and removing the lid so that
children cannot access the inner part of the appliance.
• Scrap the appliance in compliance with local Standards regarding waste disposal and take it to an appropriate
collection point. Do not leave it unattended for even just a few days as it is a source of danger for children.
• For further information regarding treatment, recovery and recycling of this appliance, contact the relative local
department, the waste collection service or the dealer where the appliance was purchased.
Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 – BV 400/25H – BV 600/60 Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 - BV 600/60 Instruction manual for vacuum chamber packaging machines Mod. BV 400/25 - BV 600/60
Rev. 01 - 04/2019 - Cod. 1500656 - Instruction manual for vacuum chamber packaging machines Mod. C46-C46H-C62
13