Function Buttons - Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento

Back/PGM Button
When connected to an ATEM switcher, pressing and holding the 'program' button on
Blackmagic Studio Camera 4K Pro displays the return feed on the LCD. Releasing the
button returns you to your live camera image. Double press the PGM button to lock on
the program return feed. Press again to return to your live camera image.
On Blackmagic Studio Camera 4K Plus, this button is labeled 'back'. Press the back
button to close the menu settings and return the LCD to the live image.

Function Buttons

These are assignable buttons you can set for easy access to your most commonly used
functions. The default functions for these buttons are:
F1 – Focus zoom.
F2 – Focus. Will trigger auto focus on compatible lenses.
F3 – Iris. Will trigger auto iris on compatible lenses.
For more information on assigning the function buttons, refer to the 'setup settings'
chapter in the 'menu settings' section.
ON/OFF switch
Switches the camera on and off.
Bright, Contrast and Peaking
Use these three dials to adjust the
brightness, contrast and focus peaking level
on the LCD touchscreen.
You can use a traditional focus peaking
style, plus the option to use coloured lines
with red, green, blue, black or white lines.
Touchscreen Display
Monitor the image using the built in
touchscreen. Tap and swipe to zoom and
adjust settings.
Handles
Built in handles on each side
of your camera let you hold
the camera when carrying and
setting up. They also help protect
the screen when setting up and
packing down.
Using Studio Camera Controls 17