Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 32

Your Blackmagic Studio Camera comes with white balance presets for a variety of color
temperature conditions. These are:
To customize the presets, tap or tap and hold the arrow icons to the left and right of the
temperature indicator. Each tap moves the color temperature up or down 50K. Holding the arrow
icons down will increase the speed. Alternatively, you can drag the temperature slider left or right.
To further dial in your image, you can adjust the 'tint.' This adjusts the mix of green and magenta
in your image. For example, adding some magenta can compensate for the green cast of many
fluorescent lights. Many of your camera's white balance presets include some tint.
Tapping the white balance and tint indicator gives you access to five presets, as
well as a white balance indicator and slider on the left, and a tint indicator on the
right. Adjust these to set a custom white balance for your lighting conditions.
In a similar fashion to white balance, tap the tint indicator's left and right arrows to make a
change. The available range is -50 to +50 in one unit steps. Holding down on the arrows
speeds up adjustment.
NOTE Customizing the white balance or tint will change your preset to 'CWB,' or
custom white balance. Custom white balances are persistent; your CWB settings will
stay configured between power cycles, and when switching to a preset and back to
CWB. This makes it easy to compare a custom white balance to the last preset used.
Auto White Balance
Your Blackmagic Studio Camera can set white balance automatically. Tapping 'AWB' will open
the white balance screen.
When setting white balance automatically, a square will be overlaid on the center of your image.
Fill this square with a neutral surface such as a white or gray card and tap 'update WB'. The
camera will automatically adjust its white balance and tint values so the average of the white or
grey inside the white balance square is as neutral as possible. Once updated, this will be set as
your camera's custom white balance. Holding the WB button on the top of your camera for three
seconds also selects automatic white balance and activates the 'update WB' function.
Bright sunlight
Incandescent bulbs
Fluorescent bulbs
Mixed light
Cloud
(5600K)
(3200K)
(4000K)
(4500K)
(6500K)
Touchscreen Controls 32