Head Up Display Settings - Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento

Head up Display Settings

This section of the manual describes the settings you can change using the head up display
and settings dial.
LCD Monitor Options
Tap the 'monitor' icon at the top left of the touchscreen to access the LCD monitor settings.
These settings let you toggle and adjust the appearance of your studio camera's monitoring
features, including zebra, focus assist, frame guides, grids, safe area guides and false color.
When accessing LCD monitor options, the controls for these features appear in a tabbed menu
along the bottom edge of the LCD touchscreen.
Tap the icon at the top left of your camera's LCD touchscreen to access LCD
monitor options
Zebra
The 'zebra' setting toggles the appearance of the zebra on the LCD touchscreen, as well as
setting the zebra level.
Zebra displays diagonal lines over areas of your image that exceed a set exposure level. For
example, setting zebra to 100% shows which areas are completely overexposed. This is useful
for achieving optimum exposure in fixed lighting conditions.
Tap the 'zebra' icon while accessing 'LCD monitor options' to access the zebra
settings
To toggle the zebra for the LCD touchscreen, tap the switch icon in the bottom left of the screen
while in the 'zebra' tab.
Set the exposure level at which the zebra appears by dragging the slider left and right, or
tapping the arrow buttons next to the zebra level percentage. Zebra level is adjustable in five
percent steps between 75 and 100 percent exposure.
For information on enabling zebra on your camera's HDMI or SDI output, see the 'monitor
settings' section in this manual.
TIP If you're shooting in variable light such as outdoors on a partly overcast day,
setting your zebra level lower than 100 can warn you of potential overexposure.
Focus Assist
The 'focus assist' setting toggles the appearance of focus assist on the LCD touchscreen,
as well as setting the level of focus assistance.
Tap the 'focus assist' icon while accessing 'LCD monitor options' to access your
camera's focus assist settings
Touchscreen Controls 19