Audio Settings - Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 411
All Monitor Settings Page 2
The second page of your Studio Camera's 'all' monitor tab contains the following options:
Grids
To set which combination of grids and crosshairs you want to display on your studio camera's
LCD touchscreen, HDMI and SDI outputs, tap the 'thirds,' 'crosshairs,' or 'center dot' options
in this setting. For more information, see the 'grids' guide in the 'touchscreen controls' section
earlier in this manual.
Safe Area Guide
To adjust the size of the safe area overlay on your studio camera's LCD touchscreen, HDMI and
SDI outputs, tap the arrows to the left and right of the percentage displayed in this setting. This
percentage indicates the size of the safe area in relation to the image frame. Most broadcasters
require a 90% safe area.

Audio Settings

The 'audio' tab lets you adjust the audio input and monitoring settings on your camera.
Audio settings for the camera are spread over two pages and divided between channels 1
and 2. You can map each audio channel to a different source, as well as adjusting various
settings such as gain control.
Audio Settings Page 1
The first page of the 'audio' tab contains the following settings.
Menu Settings
56

Publicidad

Tabla de contenido
loading

Productos relacionados para Blackmagic Design Studio Camera 4K Plus

Este manual también es adecuado para:

Studio camera 4k pro

Tabla de contenido