Blackmagic Design Studio Camera 4K Plus Manual De Instalación Y Funcionamiento página 58

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 411
Audio Settings Page 2
The second page of the 'audio' tab contains the following settings.
Headphones Volume
This slider adjusts the output levels for headphones and headsets connected to the 3.5mm or
5 pin XLR headset jacks. Move the audio slider left or right to adjust levels.
Speaker Volume
This slider adjusts the output levels for the built in speaker. Move the audio slider left or right to
adjust levels.
XLR Phantom Power
Blackmagic Studio Camera 4K Pro's XLR input can provide 48V phantom power so you can use
microphones that aren't self powered. When your camera is set to 'XLR' audio input, simply tap
the 'phantom power' switch icon to enable phantom power. Blackmagic Studio Camera 4K Pro
has two XLR inputs and separate phantom power switches for each input.
Audio Meters
You can select from VU or PPM meter types. While the VU meter has now become standardized,
PPM and loudness meters provide scaling systems and measurements for perceived loudness.
‚ VU
This meter averages out short peaks and troughs in your audio signal. It's mostly used
to monitor peaks in a signal, however, because of its averaging capability it can also be
used to monitor the perceived loudness of your audio.
‚ PPM
This meter displays a "peak hold" feature that momentarily holds the signal peaks, and
a slow fall back so you can easily see where your audio is peaking.
NOTE
It is standard practice to plug in your XLR cable before switching phantom
power on. It is also important to switch phantom power to 'off' when you no longer
have a phantom powered microphone connected. Connecting equipment that
doesn't require phantom power when still in phantom power mode can damage your
equipment, as the camera outputs a charge when in this mode. Phantom power can
also take quite a while to discharge after switching it off.
Please be aware that you should wait a few minutes when switching off phantom
power before plugging in any other microphones or XLR audio equipment.
Menu Settings
58

Publicidad

Tabla de contenido
loading

Productos relacionados para Blackmagic Design Studio Camera 4K Plus

Este manual también es adecuado para:

Studio camera 4k pro

Tabla de contenido