About This Document; Function Of This Document; Target Group; Scope - SICK L4000 Instrucciones De Operación

Operating Instructions
L4000 system
1

About this document

Note
8010009/YTA2/2016-05-02
Subject to change without notice
About this document
Please read this chapter carefully before working with these operating
instructions and the L4000 Safety Photoelectric Switch System,
termed L4000 system in the following.
1.1

Function of this document

These operating instructions provide the machine manufacturer's or
machine operator's technical personnel instructions on the safe
mounting, configuration, electrical installation, commissioning, and
on the operation and maintenance of the L4000 system.
These operating instructions do not provide instructions for operating
machines on which the L4000 system is, or will be, integrated.
Information on this is to be found in the appropriate operating
instructions of the machine.
1.2

Target group

These operating instructions are addressed to planning engineers,
developers and the operators of plant and systems which are to be
protected by the L4000 system. It also addresses people who
integrate the L4000 system into a machine, initialise its use, or who
are in charge of servicing and maintaining the unit.
1.3

Scope

This document is an original document.
These operating instructions apply to the L4000 system with one of
the following type label entries in the Operating Instructions field of
the UE401 safety evaluation device:
• 8010009/TI69
• 8010009/YTA2
1.4

Depth of information

These operating instructions contain the following information on the
L4000 system:
• Mounting
• Electrical installation
• Commissioning and con-
figuration
• Application
 SICK AG • Industrial Safety Systems • Germany • All rights reserved
• Fault, error diagnosis and
troubleshooting
• Part numbers
• Conformity and approval
• Care and maintenance
en
Chapter 1
61