Tabla de contenido
Publicidad
en | 8 | DCI 700
2.10.2 Computer unit
3
1
7
9:
Computer unit connections
(1) Serial interface (RS232)
(2) Monitor connection (VGA)
(3) Network connection (RJ45)
(4) USB 3.0 ports
(5) USB 2.0 ports
(6) Microphone and headphone port
(7) Mouse, keyboard
(8) HDMI
(9) Vent grille
(10) USB add-ons
(11) Voltage supply (power supply unit)
(12) Cable holder
The operating system, the "DDM" software and the
"DCI" software are installed on the computer unit. The
Windows firewall and virus scanner are activated to
protect against attacks from the Internet.
The computer unit is connected to the actuation unit
and the monitor. The USB ports on the front provide
the ability to connect additional USB devices, e.g. a
USB stick. The DCI 700 is connected to the Internet via
the network connection.
---Separator---
1 689 989 473 | 2020-11-24
6
9
4
USB
5
USB
2
12
10
1
7
8
11
458922-62_Pal
2.10.3 Swivel fixture with high-pressure rail
3
2
1
10:
Swivel fixture
(1) Swivel fixture with high-pressure rail
(2) Locking lever
(3) Scale plate
The injectors connected to the high-pressure rail are
placed in the vertical position with the aid of the swivel
fixture (1). The injection chambers are mounted on the
injectors in this position and the injectors connected
electrically and hydraulically. The swivel range of the
swivel fixture is 0° to 90°.
The marking "P" (rearmost position) on the scale plate
(3)
marks the position "P". The injectors are connected
to or removed from the high-pressure rail in this positi‐
on. In addition, the inlet filter and the connecting ca‐
bles for the injectors are accessible in position "P".
To swivel, pull the locking lever (2). After the locking le‐
ver has been released, place the swivel fixture
the desired position. Once the desired position has be‐
en reached, release the locking lever and allow the de‐
tent to engage the scale plate (3).
---Separator---
2.10.4 High-pressure rail
1
2
3
4
5
11:
High-pressure rail
(1) Pressure control valve K20
(2) High-pressure connection, position "A", with blind plug
(3) Hose fitting for return quantity
(4) Port for additional sensors and components
(5) Pressure limiting valve
(6) Rail pressure sensor
(7) Pressure control valve K30
A
B
A
B
C
D
C
D
(1)
in
7
6
3
Robert Bosch GmbH
Publicidad
Capítulos
Tabla de contenido
