Component Description - Bosch DCI 700 Manual Original

1 2
3
4
 6: Test oil tank pulled out
(1) Filling level indicator for minimum quantity (min.)
(2) Filling level indicator for maximum quantity (max.)
(3) Fastening screw for the test oil tank cap
(4) Test oil tank cap
(5) Test oil filter
1
2
 7: Rear of DCI 700 without cover on heat exchanger com‐
partment and test oil area
(1) Quick-release coupling for draining the test oil
(2) Heat exchanger
(3) Test oil tank
---Separator---
Robert Bosch GmbH
2
1
5
3

2.10 Component description

2.10.1 Human Machine Interface ---Separator---
1
 8: Human Machine Interface
(1) Monitor with touch controls
(2) Locking knob for tilt setting
(3) Locking knob for swivel adjustment
(4) Keyboard (not included in scope of delivery)
(5) Mouse (not included in scope of delivery)
(6) Keyboard shelf
(7) Locking knob for swivel adjustment
(8) Access to computer unit
(1)
The monitor can be tilted and swiveled on the mo‐
nitor column and has a touch-sensitive screen (touch
control). The software is controlled by touching or swi‐
ping across the glass surface.
Connections, control elements and operation of
the monitor are described in the monitor's opera‐
ting instructions.
After the corresponding locking handle
ased, the monitor can be tilted and swiveled.
A commercially available keyboard
can be used to supplement touch control. The keyboard
and mouse can be placed on the swiveling keyboard
(6)
shelf . After the locking knob
keyboard shelf can be swiveled.
Height adjustment of the HMI is described in the
 12 "Adjust the height of the
chapter
The computer unit is located behind the access (8).
---Separator---
DCI 700 | 7 | en
2
3
4
5
6
7
8
(2) or (3)is rele‐
(4) (5)
and mouse
(7)
is released, the
HMI".
1 689 989 473 | 2020-11-24