«Chef» Mode - De Dietrich DOP8786A Guia De Instalacion

4
•
COOKING
3
«CHEF» MODE
This mode will completely simplify
cooking for you because the oven will
automatically calculate all the cooking
parameters (temperature, cooking time,
cooking mode) based on the selected
dish thanks to its electronic sensors
located in the oven that constantly
measure the
temperature variations.
No preheating is required when
using the «CHEF» mode.
Cooking ABSOLUTELY must begin
in a cool oven.
IMMEDIATE COOKING
- In the general menu, select «CHEF"
cooking mode with the control knob and
confirm.
The oven proposes a choice of dishes
(see the list of dishes below).
- Select your dish and confirm.
- Confirm with the control knob again to
start cooking.
CAUTION:
This cooking mode takes place in two
phases:
1
- A first information gathering phase
during which the oven starts heating and
determines the ideal cooking time. This
phase lasts between 5 and 40 minutes
depending on the dish.
moisture level
IMPORTANT: do not open the
door during this phase or you may
disturb the recording of data and the
cooking will be cancelled.
This information gathering phase is
represented by an animation
2
- A second cooking phase: the oven
has adjusted the time needed and the
animation disappears.
and
The remaining cooking time indicated
takes into account the cooking time from
the first phase.
You can now open the door, to baste
a roast or turn over your meat.
- The oven turns off when the cooking
time is over and your screen then
indicates that the dish is ready.
DELAYED START COOKING
You can change the cooking finish time
before putting your dish into the oven at
the recommended shelf level.
To program a delayed start,
- Select the cooking end symbol , change
the cooking end time and confirm.
20
.