Fueling; Fitting The Harness - Stihl FS 300 Manual De Instrucciones

English
8.2.4 Examples
Quantity of gaso‐ STIHL two-stroke
line engine oil 1:50
Liters Liters
1 0.02
5 0.10
10 0.20
15 0.30
20 0.40
25 0.50
► Pour oil into an approved safety fuel canister
first, then add gasoline and mix thoroughly
8.3 Storing fuel mixture
Store in approved safety fuel canisters only in a
dry, cool and secure place protected against light
and sunlight.
Fuel mixture deteriorates with age – mix only as
much as needed for a few weeks. Do not store
fuel mixture for longer than 30 days. The fuel
mixture can become unusable more quickly if
exposed to light, sunlight or low or high tempera‐
tures.
STIHL MotoMix however can be stored for up to
5 years without any problems.
► Shake the canister containing the fuel mixture
thoroughly before refueling
WARNING
Pressure may have built up in the canister –
open it carefully.
► The fuel tank and the canister in which fuel
mixture is stored should be cleaned thoroughly
from time to time
Residual fuel and the liquid used for cleaning
must be disposed of in accordance with regula‐
tions and without harming the environment!
9

Fueling

64
(ml)
(20)
(100)
(200)
(300)
(400)
(500)
9.1 Preparations
► Before fueling, clean the filler cap and the area
around it to ensure that no dirt falls into the
tank.
► Position the machine so that the tank cap
faces up.
9.2 Filling Up with Fuel
Take care not to spill fuel while fueling and do
not overfill the tank. STIHL recommends you use
the STIHL filler nozzle for fuel (special acces‐
sory).
► Open the tank cap.
► Fill up with fuel.
► Closing the Tank Cap
WARNING
After fueling, tighten down the filler cap as
securely as possible by hand.

10 Fitting the Harness

To use the harness – see chapter "Approved
Combinations of Cutting Attachment, Deflector,
Handle and Harness".
9 Fueling
0458-579-8721-B