Fitting The Skirt; Mounting The Cutting Attachment - Stihl FS 300 Manual De Instrucciones

English
6.3

Fitting the Skirt

When using mowing heads
3
1
2
1
The deflector for metal mowing attachments (1)
must be equipped with the skirt (2) when you use
mowing heads.
► Slide the lower guide slot (3) of the skirt (2)
onto the deflector (1) – it must snap into posi‐
tion.
58
6.4
When using nylon line mowing heads
2
2
1
The deflector for metal mowing attachments (1)
must be equipped with the line limiter blade (4)
when you use nylon line mowing heads.
► Push the blade (4) into the upper guide slot (5)
on the skirt (2) and line it up with the first hole.
► Insert the screw and tighten it down firmly.
7 Mounting the Cutting
Attachment
7.1
► Shut off the engine.
► Lay your power tool on its back so that the cut‐
ting attachment mounting face is pointing up.

7 Mounting the Cutting Attachment

Mounting the Blade
4 5
1
4
Placing power tool on the
ground
0458-579-8721-B