Stihl FS 300 Manual De Instrucciones página 57

6 Mounting the Deflector
WARNING
Deflector (1) is approved only for mowing heads,
thus deflector (1) must be attached before
attaching a mowing head.
2
WARNING
Deflector (2) is approved only for brush knives,
thus deflector (2) must be attached before
attaching a brush knife.
2
WARNING
Deflector (2) is also approved for mowing heads
if a skirt and blade are attached – see "Mounting
the skirt and blade".
3
0458-579-8721-B
WARNING
Deflector (3) is approved only for shredder
blades, thus deflector (3) must be attached
before attaching a shredder blade.
4
5
WARNING
Limit stop (4), which acts as a deflector, is
approved only for circular saw blades, thus limit
stop (4) must be attached and guard ring (5)
replaced before attaching a circular saw blade,
see "Mounting the cutting attachment" / "Circular
saw blades".
6.2 Installing the deflector
The deflectors (1 to 4) are attached to the gear‐
box in the same manner.
7
6
► Remove dirt from the joints on the gearbox
and deflector – do not allow any dirt to enter
the threaded holes of the gearbox
► Set the deflector on the gearbox (6),
► Screw in and tighten the screws (7)
English
57