Inspections And Maintenance By Dealer; Maintenance And Care - Stihl FS 300 Manual De Instrucciones

25 Inspections and Maintenance by Dealer

25 Inspections and Mainte‐
nance by Dealer
25.1 Maintenance work
STIHL recommends that all maintenance and
repairs be carried out by STIHL servicing dealers
25.2 Anti vibration elements

26 Maintenance and Care

The following intervals apply to normal operating
conditions only. If your daily working time is longer
or operating conditions are difficult (very dusty work
area, etc.), shorten the specified intervals accord‐
ingly.
Complete machine
Control handle
Air filter
Manual fuel pump (if fit‐
ted)
Pickup body (filter) in fuel
tank
Fuel tank
Carburetor
Spark plug
0458-579-8721-B
Visual inspection (condi‐
tion, leaks)
Clean
Replace any damaged
parts
Check operation
Visual inspection
Clean
Replace
Check
Have repaired by servic‐
1)
ing dealer
Check
Replace
Clean
Check idle adjustment –
the cutting attachment
must not rotate
Adjust idle speed
Adjust electrode gap
Four antivibration elements (arrows) for damping
vibrations are installed between the engine and
the drive tube. Have them checked in the event
of noticeable, constantly increased vibration.
X X
X
X
X X
X
X X
English
X
X X
X
X
X
X
X X
X X
X
X
X
X
X
77