Approved Combinations Of Cutting Attachment, Deflector, Limit Stop And Harness - Stihl FS 300 Manual De Instrucciones

English
2.19.1 Risk of kickout
3 Approved Combinations of Cutting Attachment, Deflector, Limit
Stop and Harness
Cutting attachment
2
1
4
7
6
9
10
12
3.1 Permissible combinations
Choose the correct combination from the table
depending on the cutting tool!
54
3 Approved Combinations of Cutting Attachment, Deflector, Limit Stop and
3
5
8
11
The risk of kickout is highest in the black area of
the blade: Do not use this area of the circular
saw blade for cutting.
There is also a risk of kickout when using the
lighter shaded areas of the blade: These areas
of the blade should only be used by experienced
operators with specialized training.
STIHL recommends that you use the non-sha‐
ded area of the circular saw blade. Always start
the cut with this area of the blade.
Deflector, limit stop
13
15
14
16
17
18
19
Harn...
Carrying strap
20 21
22
0458-579-8721-B