Exhaust Emissions; Maintenance And Repairs; Disposal - Stihl FS 300 Manual De Instrucciones

30 Maintenance and Repairs

29.6.1 Sound pressure level L
ISO 22868
with cutting head
FS 300:
FS 350:
FS 380:
with metal mowing tool
FS 300:
FS 350:
FS 380:
29.6.2 Sound power level L
with cutting head
FS 300:
FS 350:
FS 380:
with metal mowing tool
FS 300:
FS 350:
FS 380:
29.6.3 Vibration level a
with cutting head
FS 300:
FS 350:
FS 380:
with metal mowing
tool
FS 300:
FS 350:
FS 380:
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2
2.0 m/s for the vibration level.
29.7 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorization and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
www.stihl.com/reach
29.8

Exhaust Emissions

The CO value measured in the EU type appro‐
2
val procedure is specified at
www.stihl.com/co2
in the product-specific technical data.
The measured CO value was determined on a
2
representative engine in accordance with a
standardized test procedure under laboratory
0458-579-8721-B
to
peq
97 dB(A)
98 dB(A)
102 dB(A)
97 dB(A)
98 dB(A)
102 dB(A)
to ISO 22868
w
111 dB(A)
112 dB(A)
114 dB(A)
110 dB(A)
111 dB(A)
114 dB(A)
to ISO 22867
hv,eq
Handle, left Handle,
right
2
3.0 m/s 2.5 m/s
2
2.8 m/s 2.5 m/s
2
2.8 m/s 2.5 m/s
Handle, left Handle,
right
2
3.0 m/s 2.5 m/s
2
3.5 m/s 2.5 m/s
2
2.8 m/s 2.5 m/s
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this User Manual. The oper‐
ating license shall be void if the engine is modi‐
fied in any way.
30 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
2
When repairing the machine, only use replace‐
2
ment parts which have been approved by STIHL
2
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
2
2
STIHL recommends the use of original STIHL
2
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).

31 Disposal

Observe all country-specific waste disposal rules
and regulations.
STIHL products must not be thrown in the gar‐
bage can. Take the product, accessories and
packaging to an approved disposal site for envi‐
ronment-friendly recycling.
English
81