Safety Instructions; Intended Use; Responsibilities Of The Owner/Operator - Conergy SmartControl System Manual De Uso

2

Safety instructions

Conergy SmartControl System
The safety instructions and warnings form an essential part
of these instructions and are of fundamental importance
when handling the devices. The Conergy SmartControl
System complies with all safety requirements of design and
tests stipulated by applicable standards.
2.1

Intended use

The Conergy SmartControl System is designed solely for the
analysis and monitoring of photovoltaic systems. Any other
use is deemed not to be as intended.
The Conergy SmartControl System must only be assembled
and installed under the permitted ambient conditions.
Intended use
specifications of this operating manual.
2.2

Responsibilities of the owner/operator

| Ensure that safe operation of the Conergy SmartControl
System is guaranteed in accordance with legal regulations
and the safety operatings quoted in this operating manual
and attached to the device.
| Ensure that the device is assembled and installed only by
authorised and suitably qualified electrical specialists.
| Ensure that the designated persons are capable of the work
assigned to them and can recognise any possible risks.
| Ensure that safety devices are not removed or disabled.
| Ensure that the operating manual is available during
installation.The operating manual forms an integral part of
the product and should be kept in the device's immediate
vicinity.
Operating manual
2 Safety instructions
also includes compliance with the
9