Overview Of Adjustment Parameters In Mymodes - Ottobock Genium 3B1-2 Instrucciones De Uso

Parameter
Sitting function
Stair Function
Pitch
Volume
In addition to the parameters, the remote control (optional accessory) can also be used to activate
deep sleep mode. Further information on deep sleep mode (see Page 78).

8.3.3 Overview of adjustment parameters in MyModes

INFORMATION
When mute mode (silent mode) is activated, no beep and vibration signals are generated.
The parameters in the MyModes describe the static behaviour of the prosthesis for a specific
motion pattern such as cross-country skiing. Damping behaviour is not automatically controlled
and adjusted in MyModes.
The following parameters can be modified in the MyModes (except MyMode "Brake
knee"):
Parameter
Gain
Pitch
Volume
Adjustment App/remote
software control
range adjustment
range
Deactivated 0 - deactivated
Activated 1 - activated
Deactivated 0 - deactivated
Activated 1 - activated
1000 Hz – 1000 Hz –
4000 Hz 4000 Hz
0 – 4 0 – 4
Adjustment App/remote
software control
range adjustment
range
0 – 100 +/- 10
1000 Hz – 1000 Hz –
4000 Hz 4000 Hz
0 – 4 0 – 4
Meaning
Activation/deactivation of the sitting
function. For switching with the Cock­
pit app or remote control, this function
has to be activated by the prosthetist.
Further information (see Page 68).
Activating/deactivating the stair and
obstacle function. For switching with
the Cockpit app or remote control,
this function has to be activated by the
prosthetist. Further information (see
Page 68).
Pitch of beep signal for confirmation
tones
Volume of beep signal for confirma­
tion tones
Meaning
Value for speed at which flexion resist­
ance increases as the knee angle
increases
Pitch of beep signal for confirmation
tones
Volume of beep signal for confirma­
tion tones
Ottobock | 75