Fcc Testing; Electromagnetic Capability (Emc) - Astute Medical ASTUTE140 METER Manual Del Usuario

Introduction

FCC Testing

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.

Electromagnetic Capability (EMC)

The electromagnetic environment should be evaluated prior to operation
of the Meter. The Meter generates radio frequency (RF) energy. Do not use
this device in close proximity to sources of strong electromagnetic radiation
(e.g. unshielded intentional RF sources), as these may interfere with proper
operation.
Any equipment connected to data ports must be certified to EC61010. If any
equipment is connected that is not recommended it must comply with this
standard. For questions or additional information, please contact Astute
Technical Support (See "Contacting Astute Medical, Inc." on p. 7 for contact
information).
The ASTUTE140
described in IEC 61326-2-6.
10
Meter complies with the emission and immunity requirements
®
ASTUTE140
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
Meter
®