Astute Medical ASTUTE140 METER Manual Del Usuario página 75

ASTUTE140 Meter
®
Troubleshooting Tips
Problem
Keypad does
not respond
Unable to
register an EQC
Device
Unable to
register a liquid
control lot
Unable to
run EQC
Unable to
run LQC
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
(Continued)
Action to Take
Reset the ASTUTE140 ® Meter by disconnecting the AC power adapter (or removing the
AA batteries if the power adapter is not being used). Wait 30 seconds and reconnect
the AC power adapter (or reinsert the batteries if the AC power adapter is not being
used). If the keypad still does not respond, call Astute Technical Support (See
"Contacting Astute Medical, Inc." on p. 7 for contact information).
Operators can only register an ASTUTE140
granted permission in the default settings. If logged in as an Operator, contact
the Supervisor to verify registration permissions. If Operator permission has been
granted, or if logged in as a Supervisor and an EQC device still cannot be registered,
call Astute Technical Support (See "Contacting Astute Medical, Inc." on p. 7 for
contact information).
Operators can only register a liquid control lot if the Supervisor has granted
permission in the default settings. If logged in as an Operator, contact the Supervisor
to verify registration permissions. If Operator permission has been granted, or if
logged in as a Supervisor and the liquid control lot still cannot be registered, call
Astute Technical Support (See "Contacting Astute Medical, Inc." on p. 7 for contact
information).
Make sure the ASTUTE140
® EQC Device has been registered. If the device has not
been registered, register it and try running EQC again (See "ASTUTE140
Registration" on p. 48 for registration instructions). If the device has been properly
registered and EQC will not run, call Astute Technical Support (See "Contacting Astute
Medical, Inc." on p. 7 for contact information).
Make sure both high and low NEPHROCHECK
been registered. If the liquid control lots have not been registered, register them
one at a time and try to run LQC again. See "Liquid Control Lot Registration" on p.
54 for registration instructions. If both high and low liquid control lots have been
registered and LQC will not run, call Astute Technical Support (See "Contacting
Astute Medical, Inc." on p. 7 for contact information).
Maintenance and Troubleshooting
EQC Device if the Supervisor has
®
liquid control and test lots have
®
® EQC Device
75