Powering On The Astute140 Meter - Astute Medical ASTUTE140 METER Manual Del Usuario

Installation
4. Holding the end of the paper, replace the printer cover as shown below until it
snaps into place.
5. To advance the paper feed press
Powering On the ASTUTE140
To power on the ASTUTE140
and toggle it upwards, holding it in position until the Self Test screen appears. The
self test feature is intended to check all internal systems of the meter to ensure they
are functioning properly, such as the hardware, software, battery voltage, operating
temperature, and optical system.
22
.
Meter, locate the power switch on the back of the meter
®
Meter
®
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
ASTUTE140 Meter
®
Figure 13.
Replacing printer cover
Figure 14.
Self Test screen