Liquid Control Lot Registration - Astute Medical ASTUTE140 METER Manual Del Usuario

ASTUTE140
®
10. When prompted, hold the NEPHROCHECK
or against the numeric keypad to register the test lot information and select OK
by pressing the right soft key.
11. If registered correctly, a screen displaying the test lot number, the test type and
the analytes detected by the test will appear. Press the right soft key to select
Accept. The test lot that was just registered should now appear in the list of
registered test lots.
12. If registered incorrectly, an error message will appear. Press the right soft key
to select OK and close the error message. Repeat steps 10–11. If registered
incorrectly a second time, contact Astute Technical Support (See "Contacting
Astute Medical, Inc." on p. 7 for contact information).
13. After use, place the NEPHROCHECK
it to the kit from which it was removed. Once all the cartridges in the kit have
been used, the NEPHROCHECK
cartridge kit may be discarded in accordance with local regulations.
14. To register another test lot, locate the NEPHROCHECK
test lot to be registered and repeat steps 7–13.

Liquid Control Lot Registration

High and low liquid controls are available to assist the Laboratory in monitoring system
performance, including the test reagents and the ASTUTE140
Each assay-specific liquid control kit includes a high and a low liquid control. Each liquid
control in the kit must be registered prior to first use. Operators may register the liquid
controls only if the Supervisor granted registration permission in the default settings;
otherwise, Supervisors must register the liquid controls.
54
Meter Operation
®
Test RFID Card for the test lot next to
®
Test RFID Card in its sleeve and return
®
Test RFID Card and the NEPHROCHECK
Test RFID Card for the
®
®
Figure 59.
Register Test Lot
screen
® Test
Meter.
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
ASTUTE140 Meter
®