Supervisor - Astute Medical ASTUTE140 METER Manual Del Usuario

Introduction
Run liquid quality control (LQC)
P
Run Calibration Verifi cation (Available in the United States only)
P
Test patient samples
P
Review and print data (Patient test results, QC test results)
P
View error log
P
Operators may perform the following functions only if a Supervisor grants permission
in the default settings:
Manage (register/delete/print) test lots
P
Manage (register/delete/print) LQC lots
P
Manage (register/delete/print) EQC devices
P
The Operator may change the following settings temporarily while using the
ASTUTE140 ® Meter; the settings will return to the default settings programmed by the
Supervisor when the meter is switched off or the Operator is logged out:
Date format
P
Time format
P
Language
P
Beeper (On/Off )
P

Supervisor

Users logged in as Supervisors may perform all of the Operator functions and the
following additional functions:
Set or change all default system settings (Time, Date, Language, Log On Setup,
P
registering lot/control permissions, QC settings)
Set or change LIS settings
P
Set PC Mode (On/Off )
P
Set or change network settings
P
Set or change print headers
P
Manage Users (change/add/delete)
P
View ASTUTE140
P
number/IP address)
16
Meter information (hardware/fi rmware/bootware/serial
®
ASTUTE140
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
Meter
®