Astute Medical ASTUTE140 METER Manual Del Usuario página 53

ASTUTE140 Meter
®
To register a test lot, perform the following steps:
1. Locate the NEPHROCHECK
Test Kit from the test lot to be registered.
2. Press the
after successful log in, the Main Menu will automatically be displayed).
3. Use the navigation keys to highlight the Operator Menu icon.
Figure 58.
Main Menu screen with
Operator Menu icon
highlighted
4. Press the right soft key to display the Operator Menu.
5. When the Operator Menu is displayed, Manage Lots is highlighted. Press the right
soft key to display the Manage Lots screen.
6. When the Manage Lots screen is displayed, Manage Test Lots is highlighted.
Press the right soft key to display the Registered Test Lots screen.
7. On the Registered Test Lots screen, a list of all the previously registered test lots
will be displayed. If the lot being registered appears on the list, it has already been
registered and need not be registered again. Press the left soft key to return to the
Main Menu. If the test lot does not appear on the list, proceed to step 8.
8. On the Registered Test Lots screen, press the right soft key to display the Options
pop-up menu.
9. When the Options pop-up menu is displayed, Print List is highlighted. Use the
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
key to display the Main Menu (if registering the test lot immediately
key to highlight Register Lot and press the right soft key.
ASTUTE140
Test RFID Card included in the NEPHROCHECK
®
Meter Operation
®
®
53