Astute Medical ASTUTE140 METER Manual Del Usuario página 35

ASTUTE140 Meter
®
3. Press the right soft key to display the Supervisor Menu.
4. When the Supervisor Menu is displayed, General Meter Settings is highlighted.
Press the right soft key to display the General Settings screen.
5. When the General Settings screen is displayed, Default Settings is highlighted.
Use the
6. When the Network Settings screen is displayed, IP Setup will be highlighted.
Use the
selected, only the Port may be changed.
Figure 31.
Network Settings screen
with DHCP selected
If Manual is selected, use the
For IP Address, Subnet Mask and Std. Gateway, enter the correct information using
the numeric keypad or an external keyboard (if connected) in the format shown.
Figure 32.
Network Settings screen
with Manual selected
To change the Port number, use the
if applicable, and then use the numeric keypad or an external keyboard (if
connected) to enter the correct port number.
7. Once all of the entries have been confirmed, press the right soft key to accept all
entries.
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
key to highlight Network Settings and press the right soft key.
keys to toggle between Manual and DHCP. NOTE: If DHCP is
keys to highlight the field to be changed.
key to first delete the existing entry,
Installation
35