Installation And Replacement Of Paper - Astute Medical ASTUTE140 METER Manual Del Usuario

ASTUTE140 Meter
®
6. Insert four AA 1.5 volt batteries, making sure that the ends of the batteries facing
up correspond to the + and – signs diagrammed in the battery compartment.
Figure 11.
Battery compartment
7. Replace the battery cover by sliding it back into position as shown until it snaps
fi rmly in place.
8. Turn the ASTUTE140
Installation or Replacement of Paper
To install or change the internal printer paper, perform the following steps:
1. Remove the printer cover by pulling up on the black handle on top of the cover.
2. If changing the paper, remove the empty spool and any unused paper.
3. Place the paper roll into the holder with the end of the paper coming from under
the roll toward the ASTUTE140
Figure 12.
Installing paper
©Astute Medical, Inc. 2020 PN 300153MULTI Rev A 2020/01/07
® Meter right side up.
Meter display.
®
Installation
21