Mounting The Cutting Attachment - Stihl FS 90 Manual De Instrucciones

Fitting the Skirt and Blade
4
4
1
5
These parts must be fitted to the
deflector (1) when you use a
mowing head.
Slide the lower guide slot of the skirt
N
(4) onto the deflector (1) – it must
snap into position.
Push the blade (5) into the upper
N
guide slot on the skirt and line it up
with the first hole.
Insert the screw and tighten it down
N
firmly.
FS 90, FS 90 R
Mounting the Limit Stop
7
6
Always fit the limit stop (6) when
you use a circular saw blade.
Position the limit stop (6) on the
N
gearbox flange.
Insert the screws (7) and tighten
N
them down firmly.
Mounting the Cutting
Attachment
Preparations
Lay your brushcutter on its back so
N
that the cutting attachment
mounting face is facing up.
Mounting hardware for cutting
attachments
The mounting hardware supplied
depends on the cutting attachment that
comes as original equipment with the
new machine.
Mounting hardware is not packed
with machine
Only mowing heads can be mounted.
English
25