Corghi ET 1450 Manual De Uso página 107

3 Apply the adhesive weight manually in the position in which the relative plane was
measured, using the centre of gravity of the weight itself as reference. In this phase,
one display shows the unbalance value of the side to be balanced and the other
shows the message "H.12" that indicates the correct application position as shown in
figure 22.
WARNING
The machine allows the operator to select how to apply the adhesive weight at 6 o'clock
(and by means of a LASER indicator if present), depending on his requirements.
To change the application position for the adhesive weights, follow the instructions in
the set up menu "Adhesive weight application position".
• Manually applied adhesive weights with laser device enabled (if provided)
1 Select the first side to be balanced
2 Turn the wheel until the central element of the corresponding position indicator lights
up together with the laser line
3 Apply the adhesive weight manually in the position in which the relative plane was
measured, using the centre of gravity of the weight itself as reference. In this phase,
one display shows the unbalance value of the side to be balanced and the other
shows the message "H.6" that indicates the correct application position as shown in
figure 22.
Operator's Manual ET 1450
22
UK
107