Corghi ET 1450 Manual De Uso página 122

- use the
- press the
o FSP 1P the machine, at the end of the acquisition of the plans, prepares itself
o FSP 2P the machine, at the end of the acquisition of the plans, prepares itself
o FSP --- setting disabled if the CAR work environment is set.
- press the
TES SETTING ENERGY SAVER
The machine includes a setting allowing the operator to modify the energy saver mode
activation time.
Proceed as follows to make these settings:
- Press the
- use the
- press the
- use the
- press to modify the mode activation time within a range from 5 to 30 minutes,
or set oFF to disable the mode.
- press the
122
search for item FSP 1P (factory setting)
key to change the setting:
in the ALU 1P balancing program
in the ALU 2P balancing program
key to confirm and exit.
INTERVENTION TIME
key.
keys to search for SEt UP
key to confirm
keys to find the item tES oFF (factory setting)
key to change the setting:
Operator's Manual ET 1450