Corghi ET 1450 Manual De Uso página 84

• settable rim width....................................................................................... from 1.5" to 25"
• rim diameter measurable with the sensor ................................................. from 8" to 28"
• settable rim diameter from ................................................................................... 1" to 50"
• max. wheel/machine distance ................................................................................ 360 mm
• max. wheel width ..................................................................................................... 600 mm
• max. wheel diameter ............................................................................................ 1117 mm
- lift load capacity ............................................................................................................150 kg
- maximum wheel weight of shaft assembly ................................................................250 kg
- Compressed air supply pressure:....................................................min 8, max 15 bar
- Machine weight (without accessories):
Manual version ..............................................................................................................139 kg
Motorised version .........................................................................................................150 kg
- Noise level in operation ...................................................................................... < 70 dB(A)
The following parts are supplied together with the machine.
Weight pliers
Threaded hub
Calliper for measuring truck wheel width
100 gram weight for calibration
200 gram weight for calibration
CH12 Allen wrench
Power cable (230V version)
Power cable (115V version)
OPTIONAL ACCESSORIES
The accessories listed below are available on request.
- Professional Ø 40 flange kit for centring truck and
bus wheels with 10-8-6 fastener holes and with centre hole diameter from 160 to 280
mm .................................................................................................................. P/N 8-21100269
- Professional Ø 40 flange kit for centring
commercial vehicle wheels with 6 fastener holes and with centre hole diameter from
130 to 166 mm ................................................................................................ P/N 8-21100270
- Ø 40 cone kit for centring truck and bus wheels with
centre hole diameter from 159 to 281 mm ................................................. P/N 8-21100268
- Ø 40 cone kit for centring passenger car wheels with hole diameter from 42 to 103.5
mm .................................................................................................................. P/N 8-21900191
- Ø 40 cone kit for centring passenger car wheels with hole diameter from 100 to 118.5
mm .................................................................................................................. P/N 8-21100080
- Ø 40 cone kit for centring van wheels with hole diameter from 117 to 173 mm
......................................................................................................................... P/N 8-21100141
- Standard Ø 40 ring nut for manual spin wheel balancer .......................... P/N 8-21100272
84
Working range
MACHINE KIT
Operator's Manual ET 1450