Corghi ET 1450 Manual De Uso página 75

WARNING
Do not stack more than two packs to avoid damaging them.
Note for manual version
If you need to move the machine frequently you can power it from an external 12V battery.
In this case, the specific kit must be ordered which allows the machine to be connected
directly to a battery or to a cigarette lighter socket.
To lift the machine insert the forks of a pallet truck or lift truck under it so that the c/c
centre is roughly aligned with the right side of the cabinet (fig.2). Alternatively you can
place the machine on its original pallet, secure it using the original fixing devices and
then lift the pallet, again using a pallet truck or lift truck.
2
UK
ATTENTION
When moving the machine never apply force to the spin shaft.
Operator's Manual ET 1450 75