Corghi ET 1450 Manual De Uso página 85

- Standard Ø 40 ring nut for motorised spin wheel balancer ..................... P/N 8-21900194
- Ø 40 quick ring nut in steel for manual spin wheel balancer .................. P/N 8-21100275
- Ø 40 FRU flange for centring passenger car wheels without centre through-hole P/N 8-21100091
- 12 V power kit for connecting to external power source
(for manual spin version only) ..................................................................... P/N 8-21101000
- Laser Blade and LED light for simplified,
quick application of adhesive weights ....................................................... P/N 8-21100238
- Laser Blade kit. High visible laser pointer helping operator select inner planes
of alloy wheels without error ...................................................................... cod. 8-21120022
- Trolley kit. Kit making wheel balancer easy to handle and move around,
allowing the operator to pick the wheel to be balanced
directly from the truck ................................................................................. P/N 8-21101400
- ROLL-BAR KIT safety tube preventing wheel from falling ...................... P/N 8-21101401
- Anchor kit for fastening machine to floor ................................................... P/N 8-21101010
- Centring accessory holder stand ................................................................. P/N 8-21101402
- Adhesive weight removal tool ...................................................................... P/N 802461006
GENERAL CONDITIONS OF USE
The equipment is intended for professional use only.
CAUTION
Only one operator at a time can work with the machine.
The wheel balancers described in this manual must be used exclusively to measure the
extent and position of car wheel unbalances, within the limits specified in the Technical
specification section. Furthermore, models equipped with motors must be provided with a
suitable guard, fitted with a safety device, which must be lowered during the spin operation.
CAUTION
Any use of the machine other than the described use is to be considered as improper
and unreasonable.
WARNING
Do not start the machine without the wheel locking equipment.
CAUTION
Do not use the machine without the guard and do not tamper with the safety device.
WARNING
Do not clean or wash the wheels mounted on the machine with compressed air or jets
of water.
Operator's Manual ET 1450
UK
85