Publicidad
A. Spring length
A. Longueur du ressort
A. Longitud del resorte
Measurement A:
Installed length:
Minimum (hard):
Standard:
Maximum (soft):
7. Tighten the locknut to the specified torque.
Tightening torque:
Locknut:
45 Nm (4.5 m0kgf)
cC
Always tighten the locknut against the
adjusting nut, and then tighten it to the spec-
ified torque.
8. Place the air filter case in the original posi-
tion, connect the air intake duct, and then
tighten the clamp screw at the carburetor
side.
9. Install the bolts, and then connect the
hose.
10. Install the seat.
4-45
250 mm
257 mm
264 mm
Publicidad
