Publicidad
1. Brake lever
2. Locknut
4. Distance between brake lever and handlebar grip
1. Levier de frein
2. Contre- écrou
4. Distance entre le levier de frein et la poignée
1. Palanca del freno 2. Contratuerca
4. Distancia entre la palanca del freno y la empuñadura del
manillar
1. Brake pedal
1. Pédale de frein
1. Pedal del freno
3. Adjusting bolt
3. Boulon de réglage
3. Perno de ajuste
4-17
EBU13860
Brake lever
The brake lever is located on the right handle-
bar. Pull it toward the handlebar to apply the
front brake.
The brake lever is equipped with a position
adjusting bolt. To adjust the distance between
the brake lever and the handlebar grip, hold the
lever away from the handlebar so it does not
contact the adjusting bolt, loosen the locknut,
turn the adjusting bolt, and then tighten the lock-
nut.
EBU09890
Brake pedal
The brake pedal is located on the right side of
the machine. Push down on the pedal to apply
the rear brake.
Publicidad
