Publicidad
1. Compression damping force adjusting screw
2. Position indicator marks
1. Bouton de réglage de la force d'amortissement de compression
2. Repères d'indication de position
1. Perilla de ajuste de la amortiguación de compresión
2. Marcas indicadoras de la posición
Adjust the compression damping force as fol-
lows.
1. Remove the seat. (See page 4-27 for seat
removal and installation procedures.)
2. Turn the compression damping force
adjusting screw in direction a to increase
the compression damping force and in
direction b to decrease the compression
damping force.
Minimum (soft): Adjusting screw fully turned
out
Standard: Adjusting screw 1 3/4 turns out
from the fully turned in position
Maximum (hard): Adjusting screw fully
turned in
NOTE:
Make sure that the position indicator marks are
aligned when the shock absorber is set to the
standard setting.
3. Install the seat.
4-49
Publicidad
