Publicidad
1. Bolt
1. Boulon
1. Perno
1. Spark plug cap
1. Capuchon de bougie
1. Tapa de bujía
4. Pull the panel backward, and then remove
it.
5. Install the fuel tank cap by turning it clock-
wise.
6. Remove the bolt, lift the rear of the fuel
tank, and then tilt it back.
w
Before lifting the fuel tank, make sure that
the fuel cock is in the "OFF" position and the
fuel
tank
cap
Otherwise, fuel may leak out of the carbure-
tor or fuel tank.
7. Remove the spark plug cap.
8-57
is
securely
tightened.
Publicidad
