Publicidad
1. Oil filter element cover
1. Couvercle de l'élément du filtre à huile
2. Boulon (×3)
1. Cubierta del elemento del filtro de aceite
2. Perno (×3)
1. Oil filter element
1. Élément du filtre à huile
1. Filtro de aceite
2. Bolt (×3)
2. O-ring (×2)
2. Joint torique (×2)
2. Junta torica (×2)
NOTE:
Skip steps 7–10 if the oil filter element is not
being replaced.
7. Remove the oil filter element cover by
removing the bolts, and then remove the
oil filter element.
8. Check the O-rings for damage, and
replace them if necessary.
9. Install a new oil filter element and the O-
rings.
NOTE:
Make sure that the O-rings are properly seated.
10. Install the oil filter element cover by
installing the bolts, and then tighten them
to the specified torque.
8-33
Publicidad
