Publicidad
1. Seat lock lever
1. Levier de verrouillage de la selle
1. Palanca de bloqueo del asiento
1. Projection (×2)
1. Pattes de fixation (×2)
1. Saliente (×2)
2. Seat holder (×2)
2. Supports de selle (×2)
2. Soporte del asiento (×2)
EBU16020
Seat
To remove the seat, insert your hand between
the rear of the seat and the rear fender, pull the
seat lock lever, and then pull up the seat at the
rear.
To install the seat, insert the projections on the
front of the seat into the seat holders and push
down on the seat at the rear.
NOTE:
Make sure that the seat is securely fitted.
4-27
Publicidad
