ATIKA BF 43-2 Manual Original página 18

Do not operate machine before having read the
operating instructions, understood all the notes and
assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
Extent of delivery
EC Declaration of Conformity
Symbols on the device
Symbols original instructions
Operating times
Proper use
Residual risks
Hand- Arm Vibrations
Safety instructions
− Personal protective equipment
− Safety instructions – before working
− Safety instructions – operating
− Safety instructions – while working
− General safety instructions
− Behaviour in an emergency situation
− Safe handling of fuels
Description of device / spare parts
Assembly
− Mounting the protective hood
− Thread knife assembly
− Assembling / Disassembling the drive unit / lower
tube shaft
− Mounting the handle
− Fixing the carrying strap
− Mounting / Removing the thread spool
− Mounting / Removing the cutting blade
Before the first start-up
Preparing for start-up
− Fuelling
− Mixing
− Fuelling of the device
Start-up
− Starting the machine
− Starting with cold engine
− Stopping the engine
− Stopping the engine in an emergency
− Starting with warm engine
Work instructions
− Working with brush cutter
− Working with the gras trimmer
Maintenance and care
− Maintenance
− Replacing the thread spool roll
− Sharpening or replacing the thread knife
− Cutting blade
− Cleaning the air filter
− Checking / replacing the fuel filter
− Checking / replacing the spark plug
− Checking the ignition spark
− Silencer / exhaust outlet
− Lubricate the gearbox
− Checking or adjusting the idle speed
− Cleaning
Transport
18
Storage
Technical data
Maintenance and cleaning schedule
Possible faults
Guarantee
Extent of delivery
18

After unpacking, check the contents of the box
18
19
for completeness

19
for possible transport damage

19
Report any damage or missing items to your dealer, supplier or
19
the manufacturer immediately. Complaints made at a later date
20
will not be acknowledged.
20
20
• 1 drive unit with upper tube
21
shaft, handle and safety
21
switch
21
• 1 lower tube shaft with
22
angular gear
22
1 carrying strap
22 •
22
1 handle
•
22
1 safety guard
•
23
1 cutting blade
•
23
23
23
EC Declaration of Conformity
23
according to Directive 2006/42/EC
23
23
Altrad Lescha Atika GmbH
24
Josef-Drexler-Str. 8, 89331 Burgau - Germany
24
declare under our sole responsibility, that the product
24
Benzin-Freischneider / Grastrimmer
24
(Petrol-grass trimmer / brush cutter) model / type BF 43-2
24
24 Serial number: 000001 - 020000
25
is conform with the above mentioned EC directives as well as with
25
the provisions of the guidelines below:
25
2014/30/EC and 2000/14/EC.
25
Conformity assessment procedure:
25
2000/14/EC - Appendix V.
25
Measured sound power level L
25
Guaranteed sound power level L
26
26
The following harmonized standards have been applied:
26
EN ISO 11806-1:2011, EN ISO 14982:2009
27
EK9-BE-55 (v2):2020, EK9-BE-56 (v4):2020,
27
EK9-BE-98 (v2):2020
27
Duly authorised person for the compilation of technical
27
documents:
27
28 Altrad Lescha Atika GmbH - Technical department
28
Josef-Drexler-Str. 8 - 89331 Burgau - Germany
28
28
28
Burgau, 05.08.2021
28
28
29
• 1 transport guard for cutting
blade
• 1 thread spool
• 1 fuel mixing tank
• 1 accessories bag
1 assembly and operating
•
instruction sheet
• 1 warranty declaration
• 1 original instructions
107.7 dB (A).
WA
113 dB (A).
WA
ppa.
ppa. G. Koppenstein
Engineering design management
29
30
31
32
32