Descargar Imprimir esta página

Wiesenfield WIE-PM-1200A Manual De Instrucciones página 125

Prensa para pellets

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 388
The side electrode of the spark plug has fallen off
High-pressure wire falls out
Ignition coil short-circuited
The spark plug wire is poorly laid or badly insulated
Damaged cylinder, leaking valve
V. THE PETROL ENGINE IS VERY HOT
The gasoline
engine is
excessively hot
PROBLEM
CAUSE
PROBLEM
CAUSE
Incorrect ignition time
Insufficient fuel supply
The exhaust pipe is blocked
Flow guard is leaking
Dirt has deposited between the
fins of the air cooling system
The cooling fan is loose
The deformation of the rod
causes lateral wear of the piston
and cylinder sleeve
EN
SOLUTION
Replace the spark plug
Keep welding
Replace the ignition coil
Check the correctness of the insulation
Repair or replace damaged parts
SOLUTION
Set the ignition advance angle properly
Top up with engine oil
Clean the exhaust pipe
Fix the damaged part
Remove the debris
Reinstall
Replace the rod

Publicidad

loading

Este manual también es adecuado para:

Wie-pm-1500a