Wiesenfield WIE-PM-1200A Manual De Instrucciones página 73

To prevent accidental start-up, make sure the switch is in the off position before connecting
f)
to a power source.
Do not overestimate your capabilities. Maintain body balance and equilibrium at all times
g)
during operation. This allows for better control of the machine in unexpected situations.
Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving
h)
parts. Loose clothing, jewelry, or long hair can be caught in moving parts.
Before switching the unit on, remove any regulating tools or keys. Any tools or keys left in
i)
the rotating part of the unit may cause injury.
Use eye, ear and respiratory protection.
j)
The product is not a toy. Children should be watched to ensure that they do not play with
k)
the product.
Do not place your hands or any objects inside the running device!
l)
2.3. Safe use of the device
Do not overload the device. Use tools that are suitable for the application. A correctly
a)
selected product will do a better and safer job for which it was designed.
Do not use the unit if the ON/OFF switch does not function properly (does not turn on and
b)
off). Units that cannot be controlled by the switch are unsafe, cannot operate, and must be
repaired.
Before cleaning, adjustment, replacement of accessories, and when the device is not in use,
c)
turn off the engine and cool the device completely.
Keep unused product out of the reach of children and anyone unfamiliar with the device or
d)
this manual. Products are dangerous when used by inexperienced users.
Keep the product in good working order. Check before each use for general damage or
e)
damage to moving parts (cracks in parts and components or any other condition that may
affect the safe operation of the device). If damaged, return the device for repair before use.
Keep the product out of the reach of children.
f)
Repairs and maintenance should be carried out by qualified personnel using only original
g)
spare parts. This will ensure the safety of use.
To ensure the designed operational integrity of the device, do not remove factory-installed
h)
covers or loosen screws.
When transporting or moving the device from storage to the place of use, observe the health
i)
and safety rules for manual handling applicable in the country where the device is used.
Avoid situations in which the device stops under heavy loads during operation. This can cause
j)
overheating of the drive elements and consequent damage to the equipment.
Do not touch any moving parts or accessories unless the device is unplugged.
k)
Do not move, shift, or rotate the device while in operation.
l)
Do not leave the device switched on unattended.
m)
Clean the device regularly to prevent permanent dirt build-up.
n)
The product is not a toy. Cleaning and maintenance must not be performed by children
o)
without adult supervision.
Do not start up an empty unit.
p)
Do not tamper with the device to alter its performance or design.
q)
Keep the unit away from sources of fire and heat.
r)
Do not overload the device.
s)
Do not block the ventilation openings of the unit!
t)
Do not use the machine at temperatures below 10°C.
u)
Before each use, check and tighten all screws and cable clamps in the control box.
v)
Do not use a machine with a clogged matrix.
w)
Regularly check the oil level and the condition of the lubrication of the rollers and the matrix.
x)
EN