Descargar Imprimir esta página

Fronius RI IO PRO/i Manual De Instrucciones página 30

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 67
Installing the interface
Safety
Danger from electric current.
This can result in serious injuries and death.
Danger from electrical current due to inadequate ground conductor connection.
This can result in serious injury and damage to property.
Installing the
1
interface
(1)
30
WARNING!
Before starting work, switch off all the devices and components involved and discon-
nect them from the grid.
Secure all devices and components involved so they cannot be switched back on.
After opening the device, use a suitable measuring instrument to check that electri-
cally charged components (such as capacitors) have been discharged.
WARNING!
Always use the original housing screws in the original quantity.
(2)
Check the position of the jumper on
2
the interface - standard mode / OC
mode
Connect cable harness (2) to the robot
3
control
Connect cable harness (2) to the inter-
4
face as illustrated
Connect cable harness (1) to the inter-
5
face as illustrated
Connect cable harness (1) to the
6
SpeedNet connection cable of the
power source
Connect the SpeedNet connection
7
cable to the SpeedNet connection
socket on the rear of the power source

Publicidad

loading